MNmx Posted July 26, 2018 Report Share Posted July 26, 2018 Good morning. I need to build a 46m property wall. It seems that 3.5m high is somewhat standard here. Is block better than brick? Is a permit required? Are there contractors who specialize is this type of work? In advice, personal experience stories and/or recommendations appreciated. Quote Link to comment Share on other sites More sharing options...
vista lake Posted July 26, 2018 Report Share Posted July 26, 2018 Well in my opinion the bricks are much better, and yes you need a permit! And is to high so you need a good foundation and a great concrete to have a good work and quality wall! Quote Link to comment Share on other sites More sharing options...
RVGRINGO Posted July 26, 2018 Report Share Posted July 26, 2018 The walls are typically built like house walls, with a 1m foundation and castillos (reinforced concrete posts) as well as reinforced concrete tops; the intervening spaces being made of plastered brick. Even with such sturdy construction, the walls are still subject to the frequent ground movement in the earthquake-prone area. Quote Link to comment Share on other sites More sharing options...
Tony321 Posted July 26, 2018 Report Share Posted July 26, 2018 Be aware of builder that insist on brick over block. Brick is more labor intenstive, that equals more cost. 1 Quote Link to comment Share on other sites More sharing options...
utilitus Posted July 26, 2018 Report Share Posted July 26, 2018 It's an entirely different approach which might require some drip irrigation, but eventually I will be building a perimeter 'wall' consisting of a similarly tall, stout chain link fence with a nice mix of vines and flowers eventually overgrowing it. If security is required, coils of razor wire might be incorporated(?) But tasteful masonry, especially elegant stonework, is typical of fine Mexican design, and if a Maestro still makes $600/mo, should represent terrific long term value. 1 Quote Link to comment Share on other sites More sharing options...
MNmx Posted July 27, 2018 Author Report Share Posted July 27, 2018 Thank you, everyone. Utilitus, can one get extra tall fencing here? Quote Link to comment Share on other sites More sharing options...
utilitus Posted July 27, 2018 Report Share Posted July 27, 2018 7 hours ago, MNmx said: Thank you, everyone. Utilitus, can one get extra tall fencing here? Good question - I'm writing from northern California, and the last time I needed an extra heavy galvanized post for a wide ag-style gate on our ranch east of Napa, I couldn't find what I was looking for at Home Depot, etc., even here. But such should be available somewhere, probably in Guadalajara, maybe 'primarily' to contractors. Sorry. But I'd keep an eye out for an existing installation, metal, masonry or otherwise that appeals to you, and make inquiries. Bon chance. Quote Link to comment Share on other sites More sharing options...
vista lake Posted July 27, 2018 Report Share Posted July 27, 2018 The galvanized fencing are expensive to, probably only 20 % more cheap, but is you make a brick wall you have more warranty and secury for youre property, check price, I have a contact for fencing they are in san antonio, if you want the contact, send ma a PM, nice day. Quote Link to comment Share on other sites More sharing options...
Ferret Posted July 27, 2018 Report Share Posted July 27, 2018 A galvanized wire fence won't keep out noise and street dust... even when it's completely covered with vines. A block wall can be painted but it will never be as aesthetically pleasing as a brick wall which will always look great... even bare. 1 Quote Link to comment Share on other sites More sharing options...
mudgirl Posted July 27, 2018 Report Share Posted July 27, 2018 Brick walls, while quite attractive, will be far more costly than block. Not only are the bricks about half the height of a block, requiring more labor time to lay, the bricks themselves are about double the price, in my experience. What can look quite nice is a block and plastered wall, with the castillo supports and the top layer done in bricks. 1 Quote Link to comment Share on other sites More sharing options...
MNmx Posted August 28, 2018 Author Report Share Posted August 28, 2018 Gracias everyone Quote Link to comment Share on other sites More sharing options...
ea93105 Posted August 28, 2018 Report Share Posted August 28, 2018 On 7/26/2018 at 9:25 AM, MNmx said: Good morning. I need to build a 46m property wall. It seems that 3.5m high is somewhat standard here. Is block better than brick? Is a permit required? Are there contractors who specialize is this type of work? In advice, personal experience stories and/or recommendations appreciated. I need pretty much the same wall, what did you find out ? Care to share which contractor you went with ? What type of wall ? Thanks Quote Link to comment Share on other sites More sharing options...
MexLuis Posted November 26, 2019 Report Share Posted November 26, 2019 I am wondering if anyone on this thread knows of contractors who would build such a wall, either in brick or block. Thank you. Quote Link to comment Share on other sites More sharing options...
777 Posted November 28, 2019 Report Share Posted November 28, 2019 Jorge is currently building a wall for us. 331-752-8887 quality work Quote Link to comment Share on other sites More sharing options...
mudgirl Posted November 29, 2019 Report Share Posted November 29, 2019 On 11/26/2019 at 2:38 PM, MexLuis said: I am wondering if anyone on this thread knows of contractors who would build such a wall, either in brick or block. Thank you. Any masonry contractor or builder can build a block or brick wall. It's a very basic thing and doesn't require any specialty skills. Quote Link to comment Share on other sites More sharing options...
Ferret Posted November 29, 2019 Report Share Posted November 29, 2019 (edited) I agree to a certain extent mudgirl. However, your statement only applies if the bricks are going to be covered over. If you're going to be seeing the bricks then you will want a skilled brick layer. It's too late tonight to post photos but I'll post tomorrow 1) of the brick work done in my atrium by JP Home Services and 2) the house next door. There is a dramatic difference depending on what you want the end result to look like... and dare I say functionality? Edited November 29, 2019 by Ferret adding photos Quote Link to comment Share on other sites More sharing options...
cedros Posted November 29, 2019 Report Share Posted November 29, 2019 Quote Stone is much better than brick and mortar. Mortar requires much more maintenance. Repairing salitre damage, repainting etc. whereas stone looks good for many years with little maintenance. 1 Quote Link to comment Share on other sites More sharing options...
Ferret Posted November 29, 2019 Report Share Posted November 29, 2019 And that kind of stonework, with no mortar, requires an even higher level of expertise. I added my photos to my post above. Quote Link to comment Share on other sites More sharing options...
cedros Posted November 29, 2019 Report Share Posted November 29, 2019 12 minutes ago, Ferret said: And that kind of stonework, with no mortar, requires an even higher level of expertise. I added my photos to my post above. They usually use mortar between the stones but it is a small amount and mostly hidden so it doesn't become a problem on the surface as it does with brick walls that are coated with mortar. The stones are what is exposed to view. Concrete bricks walls are usually plastered with mortar, brick walls often are. There is lots of this expertise in Mexico. Probably cheaper in the long run to use stone and it looks better. Quote Link to comment Share on other sites More sharing options...
bmh Posted November 29, 2019 Report Share Posted November 29, 2019 I have some tall stone eall and some brck walls.and yes stone beat brick by a long shot.. no maintenance no salitre no brick falling apart after time.. Quote Link to comment Share on other sites More sharing options...
utilitus Posted November 29, 2019 Report Share Posted November 29, 2019 May I ask, when discussing stonework Lakeside, with good quality control, can it match the (apparent) quality of this stonework from SMA ? (I know where some good portal sculptors work on Obraje in SMA). Thanks. Quote Link to comment Share on other sites More sharing options...
bmh Posted November 29, 2019 Report Share Posted November 29, 2019 I have the same wallhere in Ajijic... with the little stones between the large one, It is ot about getting better quality but about money.. If you want a similar wall here pay for it and you will get it..As far as the cantera you can get anything you want in Guadalajara again it is a question of money. not of better quality in San Miguel. Ajijic was a fisherman and campesino village so the money was not there to build such properties but as far as the work is concerned you can get the same if you pay for it. Many people chose to spend their money in other things than stone walls 1 Quote Link to comment Share on other sites More sharing options...
cedros Posted November 29, 2019 Report Share Posted November 29, 2019 50 minutes ago, utilitus said: May I ask, when discussing stonework Lakeside, with good quality control, can it match the (apparent) quality of this stonework from SMA ? (I know where some good portal sculptors work on Obraje in SMA). Thanks. Yes Quote Link to comment Share on other sites More sharing options...
utilitus Posted November 29, 2019 Report Share Posted November 29, 2019 Thanks for assurances re local stonework. I'll never forget my first trip to SMA in the early 80's when I was walking in a a high-end neighborhood and came across a craftsman installing a lintel for a beautiful portal and while chatting learned that it cost about USD$200 (then). IMhO, this typical art form can represent Mexican design at its' best, and if respected could last centuries. Well worth some extra (doomed) dollars, so long as one is careful and patient in contracting... Thanks again. Quote Link to comment Share on other sites More sharing options...
bmh Posted November 29, 2019 Report Share Posted November 29, 2019 Well in San Miguel if you are in the right area you see a lot of that work but here you may have a nice one , here and there so the effect from the street is very different.. There is a competition of stone workers in Guadalajara in the center every year.. or used to be, I have not gone lately and you can find great stone workers..t about the 200 dollars though.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.