econ man Posted March 7, 2018 Report Share Posted March 7, 2018 Is there anyplace lakeside to purchase parts for the Israeli made Heliocol tubed solar panels? TIA Link to comment Share on other sites More sharing options...
econ man Posted March 8, 2018 Author Report Share Posted March 8, 2018 Nobody? I would assume most solar heated pools lakeside use this system. Link to comment Share on other sites More sharing options...
Go Solar Posted March 8, 2018 Report Share Posted March 8, 2018 Check Tecno Agua, they list Heliocol on their website To your comment, actually the Techno Solis brand is # 1 rated by the NSTF, with a 10 year warranty, and the 1 piece construction has no parts; the interior flow channels are part of the flat plate construction and can withstand freezing solid (not exactly an issue locally.....) and 150 MPH winds when installed correctly. Being happily used all across the area at both condo and private pools and less expensive than the Heliocol, tambien. Link to comment Share on other sites More sharing options...
econ man Posted March 8, 2018 Author Report Share Posted March 8, 2018 Ok, thanks. Heliocol was the only name that came up when I searched for the Israeli manufacturer that had been mentioned on this board and their dealers list the exact part I need, but I'll also check Techno Solis Link to comment Share on other sites More sharing options...
Go Solar Posted March 9, 2018 Report Share Posted March 9, 2018 Two totally different products, sorry for any confusion. If you needed a new / replacement pool panel or system, I was mentioning the Techno-Solis as a great way to go instead of the Heliocol. Link to comment Share on other sites More sharing options...
geeser Posted March 9, 2018 Report Share Posted March 9, 2018 On 3/7/2018 at 11:15 AM, econ man said: Is there anyplace lakeside to purchase parts for the Israeli made Heliocol tubed solar panels? TIA Exactly what parts do you need? Link to comment Share on other sites More sharing options...
econ man Posted March 9, 2018 Author Report Share Posted March 9, 2018 I need a part called a "latch". It's a small wedge shaped keeper that locks the clamshell type panel clamp that seals the end cap on the larger tube. Link to comment Share on other sites More sharing options...
geeser Posted March 9, 2018 Report Share Posted March 9, 2018 1 hour ago, econ man said: I need a part called a "latch". It's a small wedge shaped keeper that locks the clamshell type panel clamp that seals the end cap on the larger tube. Can you use a stainless 3" screw clamp or a piece of 2" radiator hose such as that linking the panels with an interenal PVC plumbing plug? Link to comment Share on other sites More sharing options...
econ man Posted March 9, 2018 Author Report Share Posted March 9, 2018 I could wire the clamp together or come up with some other fix. The part is easily available NOB thru Amazon and other mail order dealers, I just thought I'd check locally. I'll be NOB at some point and order it there. Link to comment Share on other sites More sharing options...
HarryB Posted March 9, 2018 Report Share Posted March 9, 2018 We just had two STI panels added to our system and Arturo installed them . Consistent 92 - 96 daily now. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.