TheBestSideOfTheWall Posted September 23, 2017 Report Share Posted September 23, 2017 Queen of the Stupid Questions here again. All my art is still leaning against walls because I am scared to take a hammer and nail to the walls for fear I will just end up chipping the overlay. Do you need certain nails? How deep do you need to go? What happens if you hit brick? What do you do if you need to patch it because you change your mind about where something goes? Is there any way to hang extra heavy pieces? If I smash my thumb, what is the best place to go for xrays? NOB I would just hammer a hole, hang the work, step back, think it needed to go a quarter an inch up and a half an inch right, fill the first hole with white toothpaste, and repeat process until my wall had more fluoride than a dentist office. Measuring was too pedestrian Link to comment Share on other sites More sharing options...
pappysmarket Posted September 23, 2017 Report Share Posted September 23, 2017 Same way here until you hit solid concrete. Go for it. Toothpaste will fix everything. Link to comment Share on other sites More sharing options...
AngusMactavish Posted September 23, 2017 Report Share Posted September 23, 2017 1/4" masonry drill to depth, plastic anchor and screw. Link to comment Share on other sites More sharing options...
ccw Posted September 23, 2017 Report Share Posted September 23, 2017 How about using 3M Command Strips? They stick to the wall and what you hang. They come off without messing up the wall. Link to comment Share on other sites More sharing options...
TheBestSideOfTheWall Posted September 23, 2017 Author Report Share Posted September 23, 2017 1 minute ago, ccw said: How about using 3M Command Strips? They stick to the wall and what you hang. They come off without messing up the wall. I had zero luck with those in Houston due to the humidity. Guess I could try them with glass free hangings and things I wouldn't mind busted on the tile if they fail. Thanks! Link to comment Share on other sites More sharing options...
TheBestSideOfTheWall Posted September 23, 2017 Author Report Share Posted September 23, 2017 7 minutes ago, AngusMactavish said: 1/4" masonry drill to depth, plastic anchor and screw. That seems way too logical! Link to comment Share on other sites More sharing options...
ccw Posted September 23, 2017 Report Share Posted September 23, 2017 I have found out that the wall needs to be perfectly clean. I use rubbing alcohol to clean the wall and the back of the item to be hung. Link to comment Share on other sites More sharing options...
rvanparys Posted September 23, 2017 Report Share Posted September 23, 2017 McTavish is correct: 1/4" will hold a ton. Make sure you use a masonry bit and not a wood bit unless you are going to throw it away. The first layer is hard and then you hit brick which is very soft. You might also check to see if there is plumbing on the other side of the wall... Don't ask why.... Hard way to learn... Link to comment Share on other sites More sharing options...
cedros Posted September 23, 2017 Report Share Posted September 23, 2017 1 hour ago, AngusMactavish said: 1/4" masonry drill to depth, plastic anchor and screw. That is the only solution that really works. Link to comment Share on other sites More sharing options...
AlanMexicali Posted September 23, 2017 Report Share Posted September 23, 2017 If you choose to use cement nails don´t hammer them in at an angle. Hammer them in straight or you will chip a 1 inch piece out of the cement plaster. Link to comment Share on other sites More sharing options...
mudgirl Posted September 24, 2017 Report Share Posted September 24, 2017 Since you have no way of knowing where the electrical conduit or the plumbing runs in the walls unless you have built the house from scratch, I suggest that you shut off the breakers to the area where you are drilling (Just turn on some lights and the fan in the area you want to drill, then start flipping the breakers one by one until those lights go off) and use an extension cord for the drill (unless it is cordless) to an outlet that is on a different circuit. Link to comment Share on other sites More sharing options...
lakeandocean Posted September 24, 2017 Report Share Posted September 24, 2017 I usually get a rope and put it around the neck of the picture ? Link to comment Share on other sites More sharing options...
pappysmarket Posted September 24, 2017 Report Share Posted September 24, 2017 16 hours ago, TheBestSideOfTheWall said: That seems way too logical! I agree. I used to hang them the same way here as I did in Houston. Just pick a spot and bang in a nail. If you hit something real hard, chances are you hit a castillo. Never mind what that is but just move left or right a few inches and you should find the nice soft brick. Castillos are usually not much more than 6 inches wide, or so. Then if you're picky you move the couch a little but that is optional. Link to comment Share on other sites More sharing options...
jrm30655 Posted September 24, 2017 Report Share Posted September 24, 2017 A gardener and 50P can get almost anything done.......... Link to comment Share on other sites More sharing options...
cedros Posted September 24, 2017 Report Share Posted September 24, 2017 I can do a better job hanging pictures than my gardener can. Link to comment Share on other sites More sharing options...
Alpha1 Posted September 24, 2017 Report Share Posted September 24, 2017 https://encrypted-tbn2.gstatic.com/images?q=tbn:ANd9GcTcAfkPoeV4OydJ3ONN7F_xZo8wAI-XUH4i2sfGHLof9VhiLWau79X3nhZJ Link to comment Share on other sites More sharing options...
sm1mex Posted September 24, 2017 Report Share Posted September 24, 2017 Get concrete nails at any hardware store. Take scotch tape and put a piece horizontal and then over it perpendicular to the floor. When you nail through the center of both pieces of tape, the plaster will not crack and fall off. Link to comment Share on other sites More sharing options...
cedros Posted September 24, 2017 Report Share Posted September 24, 2017 2 hours ago, Alpha1 said: https://encrypted-tbn2.gstatic.com/images?q=tbn:ANd9GcTcAfkPoeV4OydJ3ONN7F_xZo8wAI-XUH4i2sfGHLof9VhiLWau79X3nhZJ Those don't work well at all in the walls here. Link to comment Share on other sites More sharing options...
puro guero Posted September 24, 2017 Report Share Posted September 24, 2017 Variation on the plastic wall anchor. Drill the same 1/4" hole, but instead of the plastic screw anchor, tap a 1/4" x 1" wooden dowel plug into the hole until flush with the wall. (these plugs come in picture hanger kits, along with the plastic anchors) You can then drive a small nail into the wooden plug. When you move, pull the nail and the plug/mark becomes almost invisible, or you can paint the spot using a cuetip. Link to comment Share on other sites More sharing options...
cedros Posted September 24, 2017 Report Share Posted September 24, 2017 2 hours ago, puro guero said: Variation on the plastic wall anchor. Drill the same 1/4" hole, but instead of the plastic screw anchor, tap a 1/4" x 1" wooden dowel plug into the hole until flush with the wall. (these plugs come in picture hanger kits, along with the plastic anchors) You can then drive a small nail into the wooden plug. When you move, pull the nail and the plug/mark becomes almost invisible, or you can paint the spot using a cuetip. Good idea. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.