Paco Loco Posted August 22, 2017 Report Share Posted August 22, 2017 Upper Chula Vista had a five hour power outage yesterday. CFE managed to let the power surge to over 210 volts AC which fried several 110 to D.C. Transformers and the surge protectors that I have for my big screen TV and sat receiver. My old "beer fridge" motor is buzzing and I expect that it took a hit too. This was the worst power surge in eleven years. Link to comment Share on other sites More sharing options...
tomgates Posted August 22, 2017 Report Share Posted August 22, 2017 Home Insurance covers this kind of surge. Link to comment Share on other sites More sharing options...
lakeside7 Posted August 23, 2017 Report Share Posted August 23, 2017 1 minute ago, tomgates said: Home Insurance covers this kind of surge. Hmmmmm, what's home insurance Link to comment Share on other sites More sharing options...
AlanMexicali Posted August 23, 2017 Report Share Posted August 23, 2017 Without a proper ground on your ac outlets a surge protector won´t work. Some homes have no ground wire or the ground is not real ground potential they have it connected to. The quality of your surge protector bars also are a factor in protecting appliances efficiently. Link to comment Share on other sites More sharing options...
geeser Posted August 23, 2017 Report Share Posted August 23, 2017 When you replace those burned out surge protection strips you should also add a whole house surge protector as well. But you need to be sure your house receptals are indeed grounded although the whole house one will work anyway. Look for something like this. Link to comment Share on other sites More sharing options...
tomgates Posted August 23, 2017 Report Share Posted August 23, 2017 Seriously, Lakeside, is that a question? Homeowners insurance is pretty standard in most parts of the developed world. Ours covers theft, earthquake, electrical surges and probably most important, liability and medical for guests and workers. Link to comment Share on other sites More sharing options...
cedros Posted August 23, 2017 Report Share Posted August 23, 2017 9 hours ago, geeser said: When you replace those burned out surge protection strips you should also add a whole house surge protector as well. But you need to be sure your house receptals are indeed grounded although the whole house one will work anyway. Look for something like this. I wonder if a local electrician could connect it properly. Where would you put it? Link to comment Share on other sites More sharing options...
Yo1 Posted August 23, 2017 Report Share Posted August 23, 2017 If you could only find a REAL electrician. They are few and far between. Also, your whole house needs to be grounded in order for these to work. Link to comment Share on other sites More sharing options...
geeser Posted August 23, 2017 Report Share Posted August 23, 2017 1 hour ago, cedros said: I wonder if a local electrician could connect it properly. Where would you put it? The device mounts in a hole the electrician will punch our that is pre-punched in the breaker box. It has two wires that go across both hot legs. One of mine had a chassis ground and one did not I can give you the name and cell of the electrician that installed two at my house over the years. But I believe any jack-legged electrician can install it. The nice thing about these surge protectors is that they leave you with electricity with just a throw of the breakers that flip. It protects both legs of electricity. On a service with only one hot leg it goes hot to ground. It will have to be replaced because it burns out with a big surge like lightning..In 20 years only one has burned out. On a two leg system it isn't necessary for it to be grounded to work it just shorts the two and flips the breakers. It is certainly possible to just ground the unit. They drilled thorough the slab years ago and hammered in a second ground rod down below the breaker box. Link to comment Share on other sites More sharing options...
Paco Loco Posted August 23, 2017 Author Report Share Posted August 23, 2017 Please PM me with the electricians name. Can you find a surge protector like this in Guad. Link to comment Share on other sites More sharing options...
Lakesider Posted August 24, 2017 Report Share Posted August 24, 2017 Hi Paco Loco! Would you be kind to tell me which part of Upper Chula Vista was affected with the CFE Burnt Out a few days ago? I have a place there but I am currently North of the Border. I just am worried about my appliances too.Thank you. Link to comment Share on other sites More sharing options...
Paco Loco Posted August 24, 2017 Author Report Share Posted August 24, 2017 Hill top Jacarandas Privada Link to comment Share on other sites More sharing options...
Lakesider Posted August 24, 2017 Report Share Posted August 24, 2017 Gracias Paco!! Link to comment Share on other sites More sharing options...
SunFan Posted August 25, 2017 Report Share Posted August 25, 2017 I live on Jacarandas Privada. My whole house surge protector (on two phases) protected all my electronics during the most recent of many CFS screw-ups. SunFan Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.