J.Miller Posted December 24, 2016 Report Share Posted December 24, 2016 We have a new Koblenz stove from Tio Sams. We have had it about six weeks and are stymied about how long and how many tries it takes to light the oven. We hold the electronic start oven button in and count to 30, or 40 or 65 this morning without success. I have called the guy whom we bought it from and he tells us that we should stop in and find out how to light it. That would be good if we didn't have to drive an hour to do so (an hour and a half with increased traffic). Has anyone else had this problem and if so, did you ever figure out how to light the oven without a hassle? I have to put a chicken in to cook in a couple of hours; I had a practice run earlier and gave up but there has to be a way. Link to comment Share on other sites More sharing options...
El Cartero Posted December 24, 2016 Report Share Posted December 24, 2016 If the stove top has a lid/cover be sure to lift it up when lighting and leave it up while the oven is working. Link to comment Share on other sites More sharing options...
johanson Posted December 24, 2016 Report Share Posted December 24, 2016 Would the Tio Sams lakeside on the Libramiento perhaps be able to help you? Link to comment Share on other sites More sharing options...
Mainecoons Posted December 24, 2016 Report Share Posted December 24, 2016 Maybe you can light manually? Link to comment Share on other sites More sharing options...
sparks Posted December 24, 2016 Report Share Posted December 24, 2016 Probably electric start just like the burners. Mine is not so I turn on the gas and put a match to the little hole inside the oven Link to comment Share on other sites More sharing options...
cstone Posted December 24, 2016 Report Share Posted December 24, 2016 I have to turn my oven knob ALL THE WAY to the maximum and hold it down until I see the flames start. Then hold another 5-6 seconds and it stays lit. It took me a while to "get it" right. If you let go as soon as you see the flame, it won't stay lit. Just me experience, so hope it helps. Link to comment Share on other sites More sharing options...
ComputerGuy Posted December 24, 2016 Report Share Posted December 24, 2016 The pipes get bunged up over time, but it sounds like there is a problem with yours. You turn the oven knob to high, then press the electric start, and it takes a second or two. When clogged or disconnected, using a long lighter over the hole in the oven should work. Mine has not been used since last year, and yesterday I discovered my quick-start wasn't doing anything. I needed to use a lighter. The next thing to do is remove the bottom plate from the oven and make sure the gas tube is properly fitted over the central flame burner unit; perhaps the delivery dislodged it. Link to comment Share on other sites More sharing options...
RVGRINGO Posted December 24, 2016 Report Share Posted December 24, 2016 With a new stove installation, the lines are still full of air. It will take many attempts before you actually get propane to the oven burner, sufficient for ignition. Just keep trying, and trying, and trying, until you hear a WHUMP of ignition, which will probably make you jump back, releasing the button and causing it to go out. From that point onward, it should light quite easily, as the gas has arrived where it needs to be. Just remember that you have to hold the knob IN until the thermocouple gets hot enough to keep the burner burning; usually 5-10 seconds after ignition. Link to comment Share on other sites More sharing options...
Sea Posted December 25, 2016 Report Share Posted December 25, 2016 My oven has a weird requirement. You have to open the oven door a few inches when lighting. That must unlock something. No idea actually, but it's in the instructions and won't light without it. Link to comment Share on other sites More sharing options...
bmh Posted December 25, 2016 Report Share Posted December 25, 2016 I use a lighter and that works every time, I do not bother with the automatic lighter. On mine I have to put it on the start push it in and sometimes it works and sometimes it does not so I do not bother. Link to comment Share on other sites More sharing options...
ComputerGuy Posted December 25, 2016 Report Share Posted December 25, 2016 10 hours ago, Sea said: My oven has a weird requirement. You have to open the oven door a few inches when lighting. That must unlock something. No idea actually, but it's in the instructions and won't light without it. Interesting. To prevent an accidental buildup of gas, perhaps. Link to comment Share on other sites More sharing options...
addtocart Posted December 25, 2016 Report Share Posted December 25, 2016 I turn on the gas, let it be for ten seconds, then throw a lighted match at the oven and hide behind the kitchen door. Link to comment Share on other sites More sharing options...
mkshawn Posted December 25, 2016 Report Share Posted December 25, 2016 Just a thought, not all electronic starters are hooked up to the Oven. Ours must have a manual BBQ lighter applied to the down draft opening at the base of the open oven door as others have described. If the gas manifold is actually hooked up properly it should light every time? If all else fails follow the advice above!!! Link to comment Share on other sites More sharing options...
dave0415 Posted December 25, 2016 Report Share Posted December 25, 2016 Looking at most of the replies I think the proper answer to the OP is "Carefully". However If all else fails the opening the valve and inserting a lighted match in the oven overcomes lack of technical knowledge Link to comment Share on other sites More sharing options...
dave0415 Posted December 25, 2016 Report Share Posted December 25, 2016 After having a problem with our old stove which more or less exploded on me several days ago I have finally worked out how our new one (installed yesterday) works. After a few tries the oven is now ready for the prime rib roast and heating up nicely. Link to comment Share on other sites More sharing options...
cedros Posted December 25, 2016 Report Share Posted December 25, 2016 Is your Koblenz stove a German one? I have a Wolf stove which I think is German. To light the oven you turn the dial to the desired temperature and turn the oven knob to on and it lights electronically. None of my top burners will light electronically though. Link to comment Share on other sites More sharing options...
J.Miller Posted December 25, 2016 Author Report Share Posted December 25, 2016 I did finally get the oven lit using a suggestion to ignite the pilot and then turn the dial to the highest setting. I had to hold it here for nearly a minute but it did finally stay lit. considering the oven is only just past the six week old mark, it seems like a ridiculous exercise in frustration just to light the oven. The pilot lights immediately when you push the nob in and turn it to the ignition site; it is getting the burner to light and stay lit that requires the most patience. All six of the top burners light immediately and function as you would expect; it is just the oven; it is probably faster to rub sticks together in a fire pit in the back yard. Thanks everyone for your responses and suggestions. Link to comment Share on other sites More sharing options...
Ferret Posted December 25, 2016 Report Share Posted December 25, 2016 I don't think you should be experiencing this "ridiculous exercise in frustration" in a new stove. Tio Sam's will be responsive to your frustration and send their excellent repair man to your rescue. Something's not right. I bought a Frigidaire 20" stove from them and have been thoroughly delighted using it. After 20 years of dealing with singed eyebrows when lighting various Mexican ovens manually, I now have electronic ignition in the oven that also has an accurate thermostat. What an absolute delight...and I know that Tio Sam's will be there for me if anything goes wrong. Suerte! Link to comment Share on other sites More sharing options...
puro guero Posted December 25, 2016 Report Share Posted December 25, 2016 When all else fails, read the user manual. Specifically says "Keep the knob pressed in for approximately 40 seconds" http://www.koblenz.com.mx/manuals/estufas.pdf Link to comment Share on other sites More sharing options...
Natasha Posted December 26, 2016 Report Share Posted December 26, 2016 OR..... you could do what I've done with prior and present "electronic ignition" stoves. Pull the plug and light burners and oven manually. Better control for very low flame on stovetop burners, and no wondering if gas is building up in the oven. In mine, I have to manually move the "bottom" in the oven forward (nearly out), and reach in with lighter to close to where the burner is, and then turn the temp control know and light the lighter at the same. time. Slide bottom piece back into place. Easy peasy. Link to comment Share on other sites More sharing options...
JKL Posted December 26, 2016 Report Share Posted December 26, 2016 Having had the same experiences with all of the above I must add that I've noticed if the gas tank is getting low it's almost impossible to light the oven. There's also a difference in how hot the temperature will get if the gas tank is low. The top burners will continue to work just fine even with a low gas tank - but not the oven. Link to comment Share on other sites More sharing options...
ComputerGuy Posted December 26, 2016 Report Share Posted December 26, 2016 17 hours ago, puro guero said: When all else fails, read the user manual. Specifically says "Keep the knob pressed in for approximately 40 seconds" http://www.koblenz.com.mx/manuals/estufas.pdf That's real handy if you are real good with Spanish. The OP was asking for guidance. Link to comment Share on other sites More sharing options...
moderator-2 Posted December 29, 2016 Report Share Posted December 29, 2016 The best guidance is to go to Tio Sams and get help and if they don't fix it, get a qualified service person to fix it. Don't take chances with gas. Closed. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.